JEE Advanced Eligibility Criteria, JEE Advanced 2018, Exam Pattern, Syllabus, Question Paper, Results, Answer Key
JEE Advanced Eligibility Criteria, Exam Pattern, Syllabus, Question Papers, Results
JEE Advanced 2018 Important Dates
S. No. | Description | Day, Date and Time |
1 | JEE (Main) 2018 [Offline exam] | First Week April 2018 |
2 | Results of JEE (Main) 2018 | Last Week April 2018 |
3 | Registration for JEE (Advanced) 2018 | Last Week April 2018 |
4 | Registration with Late Fee | First Week May 2018 |
5 | Admit card available for downloading | Second –Third Week May 2018 |
6 | JEE (Advanced) 2018 Paper – 1 Paper – 2 | Examination will be held on May 20, 2018. The entire JEE (Advanced) 2018 Examination will be conducted in fully computer based test mode. The exam consists of two papers, Paper 1 and Paper 2, each of three hours’ duration, and will be held in two sessions. Boe papers are compulsory. |
7 | (a) Online display of ORS and scanned responses (b) Request from candidates for review of scanned responses | Last Week May 2018 |
8 | Online display of answer keys | First Week June 2018 |
9 | Feedback and comments on answer keys from the candidates | First Week June 2018 |
10 | Declaration of JEE (Advanced) results | June 2018 |
11 | Online registration for Architecture Aptitude Test (AAT) | June 2018 |
12 | Architecture Aptitude Test | June 2018 |
13 | Declaration of AAT results | Mid June 2018 |
14 | Seat Allotment (Tentative) | June – July 2018 |
Schedule of JEE Advanced 2018
The Joint Entrance Examination (Advanced) 2018 will be conducted by the IITs under the guidance of the Joint Admission Board (JAB) 2018. The performance of a candidate in this examination will form the basis for admission to the Bachelor’s, Integrated Master’s and Dual Degree programs (entry at the 10+2 level) in all the IITs. The decisions of the JAB 2018 will be final in all matters related to JEE (Advanced) 2018 and admission to IITs.
The examination consists of two papers, Paper 1 and Paper 2, each of three hours duration and will be held as per the following schedule:
Item | Day | Date | Time | Session |
---|---|---|---|---|
Paper-1 | Sunday | 20-May-2018 | 09:00 to 12:00 IST | Session 1 |
Paper-2 | Sunday | 20-May-2018 | 14:00 to 17:00 IST | Session 2 |
Boe papers are compulsory. The exam will be held in fully computer-based test mode.
The schedule will remain the same even if the day of examination is declared a public holiday.
Eligibility Criteria JEE Advanced 2018
Candidates should be among the top 2,24,000 (including all categories) in Paper-1 of JEE (Main)-2018.
JEE Advanced 2018 Eligibility Criteria For Indian Nationals (including PIO/OCI For Appearing In Jee (Advanced) 2018
All the candidates must fulfil each and every one of the following five criteria to appear in JEE (Advanced) 2018.
Criterion 1 – Performance in JEE (Main) 2018: Candidates should be among the top 2,24,000* (including all categories) in Paper-1 of JEE (Main) 2018.
The percentages of various categories of candidates to be shortlisted are: 27% for OBC-NCL, 15% for SC, 7.5% for ST and the remaining 50.5% is OPEN for all. Within each of these four categories, 5% horizontal reservation is available for PwD candidates.
The following table show the order to be followed while choosing top 2,24,000* candidates in various categories based on the performance in Paper-1 of JEE (Main) 2018.
Category-wise distribution of top 2,24,000* candidates (Criterion 1)
ORDER | CATEGORY | Number of “Top” candidates | |
1 | OPEN | 1,07,464 | Total 1,13,120 |
2 | OPEN-PwD | 5,656 | |
3 | OBC-NCL | 57,456 | Total 60,480 |
4 | OBC-NCL-PwD | 3,024 | |
5 | SC | 31,920 | Total 33,600 |
6 | SC-PwD | 1,680 | |
7 | ST | 15,960 | Total 16,800 |
8 | ST-PwD | 840 |
* The total number of candidates can be slightly greater than 2,24,000 in the presence of “tied” ranks/scores in any category.
Criterion 2 – Age limit: Candidates should have been born on or after October 1, 1993. Five years relaxation is given to SC, ST and PwD candidates, i.e., these candidates should have been born on or after October 1, 1988.
Criterion 3 – Number of attempts: A candidate can attempt JEE (Advanced) a maximum of two times in consecutive years.
Criterion 4 – Appearance in Class XII (or equivalent) examination: A candidate should have appeared for the Class XII (or equivalent) examination for the first time in either 2017 or 2018.
However, if the examination Board of Class XII (or equivalent) declares the results for the academic year 2015-16 after June 2016, then the candidates of that board who appeared for their class XII exam in 2016 are also eligible to appear in JEE (Advanced) 2018, provided they meet the other eligibility criteria. In case, the examination Board of Class XII (or equivalent) declared the results for the academic year 2015-16 before June 2016 but the result of a particular candidate was withheld, then the candidate will not be eligible to appear in JEE (Advanced) 2018.
Criterion 5 – Earlier admission at IITs: A candidate should NOT have been admitted in an IIT irrespective of whether or not he/she continued in the program OR accepted an IIT seat by reporting at a reporting centre in the past. Candidates whose admission at IITs was cancelled after joining any IIT are also NOT eligible to appear in JEE (Advanced) 2018.
Candidates who have been admitted to a preparatory course in any of the IITs for the first time in 2017 can appear in JEE (Advanced) 2018.
The candidates who paid seat acceptance fee in 2017 but (i) did not report at any reporting centre OR, (ii) withdrew before the last round of seat allotment, OR, (iii) had their seat cancelled (for whatever reason) before the last round of seat allotment for IITs, during the joint seat allocation in 2017 are eligible to appear in JEE (Advanced) 2018.
However, in any of the above cases, the candidate is required to fulfil the conditions mentioned from criterion 1 to criterion 4.
Syllabus of JEE Advanced 2018
Concept of atoms and molecules; Dalton’s atomic theory; Mole concept; Chemical formulae; Balanced chemical equations; Calculations (based on mole concept) involving common oxidation-reduction, neutralisation, and displacement reactions; Concentration in terms of mole fraction, molarity, molality and normality.
Absolute scale of temperature, ideal gas equation; Deviation from ideality, van der Waals equation; Kinetic theory of gases, average, root mean square and most probable velocities and their relation with temperature; Law of partial pressures; Vapour pressure; Diffusion of gases.
Bohr model, spectrum of hydrogen atom, quantum numbers; Wave-particle duality, de Broglie hypothesis; Uncertainty principle; Qualitative quantum mechanical picture of hydrogen atom, shapes of s, p and d orbitals; Electronic configurations of elements (up to atomic number 36); Aufbau principle; Pauli’s exclusion principle and Hund’s rule; Orbital overlap and covalent bond; Hybridisation involving s, p and d orbitals only; Orbital energy diagrams for homonuclear diatomic species; Hydrogen bond; Polarity in molecules, dipole moment (qualitative aspects only); VSEPR model and shapes of molecules (linear, angular, triangular, square planar, pyramidal, square pyramidal, trigonal bipyramidal, tetrahedral and octahedral).
First law of thermodynamics; Internal energy, work and heat, pressure-volume work; Enthalpy, Hess’s law; Heat of reaction, fusion and vapourization; Second law of thermodynamics; Entropy; Free energy; Criterion of spontaneity.
Law of mass action; Equilibrium constant, Le Chatelier’s principle (effect of concentration, temperature and pressure); Significance of ΔG and ΔG^{0} in chemical equilibrium; Solubility product, common ion effect, pH and buffer solutions; Acids and bases (Bronsted and Lewis concepts); Hydrolysis of salts.
Electrochemical cells and cell reactions; Standard electrode potentials; Nernst equation and its relation to ΔG; Electrochemical series, emf of galvanic cells; Faraday’s laws of electrolysis; Electrolytic conductance, specific, equivalent and molar conductivity, Kohlrausch’s law; Concentration cells.
Rates of chemical reactions; Order of reactions; Rate constant; First order reactions; Temperature dependence of rate constant (Arrhenius equation).
Classification of solids, crystalline state, seven crystal systems (cell parameters a, b, c, α, β, γ), close packed structure of solids (cubic), packing in fcc, bcc and hcp lattices; Nearest neighbours, ionic radii, simple ionic compounds, point defects.
Raoult’s law; Molecular weight determination from lowering of vapour pressure, elevation of boiling point and depression of freezing point.
Elementary concepts of adsorption (excluding adsorption isotherms); Colloids: types, methods of preparation and general properties; Elementary ideas of emulsions, surfactants and micelles (only definitions and examples).
Radioactivity: isotopes and isobars; Properties of α, β and γ rays; Kinetics of radioactive decay (decay series excluded), carbon dating; Stability of nuclei with respect to proton-neutron ratio; Brief discussion on fission and fusion reactions.
Boron, silicon, nitrogen, phosphorus, oxygen, sulphur and halogens; Properties of allotropes of carbon (only diamond and graphite), phosphorus and sulphur.
Oxides, peroxides, hydroxides, carbonates, bicarbonates, chlorides and sulphates of sodium, potassium, magnesium and calcium; Boron: diborane, boric acid and borax; Aluminium: alumina, aluminium chloride and alums; Carbon: oxides and oxyacid (carbonic acid); Silicon: silicones, silicates and silicon carbide; Nitrogen: oxides, oxyacids and ammonia; Phosphorus: oxides, oxyacids (phosphorus acid, phosphoric acid) and phosphine; Oxygen: ozone and hydrogen peroxide; Sulphur: hydrogen sulphide, oxides, sulphurous acid, sulphuric acid and sodium thiosulphate; Halogens: hydrohalic acids, oxides and oxyacids of chlorine, bleaching powder; Xenon fluorides.
Definition, general characteristics, oxidation states and their stabilities, colour (excluding the details of electronic transitions) and calculation of spin-only magnetic moment; Coordination compounds: nomenclature of mononuclear coordination compounds, cis-trans and ionisation isomerisms, hybridization and geometries of mononuclear coordination compounds (linear, tetrahedral, square planar and octahedral).
Oxides and chlorides of tin and lead; Oxides, chlorides and sulphates of Fe^{2+}, Cu^{2+} and Zn^{2+}; Potassium permanganate, potassium dichromate, silver oxide, silver nitrate, silver thiosulphate.
Commonly occurring ores and minerals of iron, copper, tin, lead, magnesium, aluminium, zinc and silver.
Chemical principles and reactions only (industrial details excluded); Carbon reduction method (iron and tin); Self reduction method (copper and lead); Electrolytic reduction method (magnesium and aluminium); Cyanide process (silver and gold).
Groups I to V (only Ag^{+}, Hg^{2+}, Cu^{2+}, Pb^{2+}, Bi^{3+}, Fe^{3+}, Cr^{3+}, Al^{3+}, Ca^{2+}, Ba^{2+}, Zn^{2+}, Mn^{2+} and Mg^{2+}); Nitrate, halides (excluding fluoride), sulphate and sulphide.
Hybridisation of carbon; σ and π-bonds; Shapes of simple organic molecules; Structural and geometrical isomerism; Optical isomerism of compounds containing up to two asymmetric centres, (R,S and E,Z nomenclature excluded); IUPAC nomenclature of simple organic compounds (only hydrocarbons, mono-functional and bi-functional compounds); Conformations of ethane and butane (Newman projections); Resonance and hyperconjugation; Keto-enoltautomerism; Determination of empirical and molecular formulae of simple compounds (only combustion method); Hydrogen bonds: definition and their effects on physical properties of alcohols and carboxylic acids; Inductive and resonance effects on acidity and basicity of organic acids and bases; Polarity and inductive effects in alkyl halides; Reactive intermediates produced during homolytic and heterolytic bond cleavage; Formation, structure and stability of carbocations, carbanions and free radicals.
Homologous series, physical properties of alkanes (melting points, boiling points and density); Combustion and halogenation of alkanes; Preparation of alkanes by Wurtz reaction and decarboxylation reactions.
Physical properties of alkenes and alkynes (boiling points, density and dipole moments); Acidity of alkynes; Acid catalysed hydration of alkenes and alkynes (excluding the stereochemistry of addition and elimination); Reactions of alkenes with KMnO_{4} and ozone; Reduction of alkenes and alkynes; Preparation of alkenes and alkynes by elimination reactions; Electrophilic addition reactions of alkenes with X_{2}, HX, HOX and H_{2}O (X=halogen); Addition reactions of alkynes; Metal acetylides.
Structure and aromaticity; Electrophilic substitution reactions: halogenation, nitration, sulphonation, Friedel-Crafts alkylation and acylation; Effect of o-, m– and p-directing groups in monosubstituted benzenes.
Acidity, electrophilic substitution reactions (halogenation, nitration and sulphonation); Reimer-Tieman reaction, Kolbe reaction.
Alkyl halides: rearrangement reactions of alkyl carbocation, Grignard reactions, nucleophilic substitution reactions; Alcohols: esterification, dehydration and oxidation, reaction with sodium, phosphorus halides, ZnCl_{2}/concentrated HCl, conversion of alcohols into aldehydes and ketones; Ethers: Preparation by Williamson’s Synthesis; Aldehydes and Ketones: oxidation, reduction, oxime and hydrazone formation; aldol condensation, Perkin reaction; Cannizzaro reaction; haloform reaction and nucleophilic addition reactions (Grignard addition); Carboxylic acids: formation of esters, acid chlorides and amides, ester hydrolysis; Amines: basicity of substituted anilines and aliphatic amines, preparation from nitro compounds, reaction with nitrous acid, azo coupling reaction of diazonium salts of aromatic amines, Sandmeyer and related reactions of diazonium salts; carbylamine reaction; Haloarenes: nucleophilic aromatic substitution in haloarenes and substituted haloarenes (excluding Benzyne mechanism and Cine substitution).
Classification; mono- and di-saccharides (glucose and sucrose); Oxidation, reduction, glycoside formation and hydrolysis of sucrose.
General structure (only primary structure for peptides) and physical properties.
Natural rubber, cellulose, nylon, teflon and PVC.
Detection of elements (N, S, halogens); Detection and identification of the following functional groups: hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketone), carboxyl, amino and nitro; Chemical methods of separation of mono-functional organic compounds from binary mixtures.
Algebra of complex numbers, addition, multiplication, conjugation, polar representation, properties of modulus and principal argument, triangle inequality, cube roots of unity, geometric interpretations.
Quadratic equations with real coefficients, relations between roots and coefficients, formation of quadratic equations with given roots, symmetric functions of roots.
Arithmetic, geometric and harmonic progressions, arithmetic, geometric and harmonic means, sums of finite arithmetic and geometric progressions, infinite geometric series, sums of squares and cubes of the first n natural numbers.
Logarithms and their properties.
Permutations and combinations, binomial theorem for a positive integral index, properties of binomial coefficients.
Matrices as a rectangular array of real numbers, equality of matrices, addition, multiplication by a scalar and product of matrices, transpose of a matrix, determinant of a square matrix of order up to three, inverse of a square matrix of order up to three, properties of these matrix operations, diagonal, symmetric and skew-symmetric matrices and their properties, solutions of simultaneous linear equations in two or three variables.
Addition and multiplication rules of probability, conditional probability, Bayes Theorem, independence of events, computation of probability of events using permutations and combinations.
Trigonometric functions, their periodicity and graphs, addition and subtraction formulae, formulae involving multiple and sub-multiple angles, general solution of trigonometric equations.
Relations between sides and angles of a triangle, sine rule, cosine rule, half-angle formula and the area of a triangle, inverse trigonometric functions (principal value only).
Two dimensions: Cartesian coordinates, distance between two points, section formulae, shift of origin.
Equation of a straight line in various forms, angle between two lines, distance of a point from a line; Lines through the point of intersection of two given lines, equation of the bisector of the angle between two lines, concurrency of lines; Centroid, orthocentre, incentre and circumcentre of a triangle.
Equation of a circle in various forms, equations of tangent, normal and chord.
Parametric equations of a circle, intersection of a circle with a straight line or a circle, equation of a circle through the points of intersection of two circles and those of a circle and a straight line.
Equations of a parabola, ellipse and hyperbola in standard form, their foci, directrices and eccentricity, parametric equations, equations of tangent and normal.
Locus problems.
Three dimensions: Direction cosines and direction ratios, equation of a straight line in space, equation of a plane, distance of a point from a plane.
Real valued functions of a real variable, into, onto and one-to-one functions, sum, difference, product and quotient of two functions, composite functions, absolute value, polynomial, rational, trigonometric, exponential and logarithmic functions.
Limit and continuity of a function, limit and continuity of the sum, difference, product and quotient of two functions, L’Hospital rule of evaluation of limits of functions.
Even and odd functions, inverse of a function, continuity of composite functions, intermediate value property of continuous functions.
Derivative of a function, derivative of the sum, difference, product and quotient of two functions, chain rule, derivatives of polynomial, rational, trigonometric, inverse trigonometric, exponential and logarithmic functions.
Derivatives of implicit functions, derivatives up to order two, geometrical interpretation of the derivative, tangents and normals, increasing and decreasing functions, maximum and minimum values of a function, Rolle’s theorem and Lagrange’s mean value theorem.
Integration as the inverse process of differentiation, indefinite integrals of standard functions, definite integrals and their properties, fundamental theorem of integral calculus.
Integration by parts, integration by the methods of substitution and partial fractions, application of definite integrals to the determination of areas involving simple curves.
Formation of ordinary differential equations, solution of homogeneous differential equations, separation of variables method, linear first order differential equations.
Addition of vectors, scalar multiplication, dot and cross products, scalar triple products and their geometrical interpretations.
Units and dimensions, dimensional analysis; least count, significant figures; Methods of measurement and error analysis for physical quantities pertaining to the following experiments: Experiments based on using Vernier calipers and screw gauge (micrometer), Determination of g using simple pendulum, Young’s modulus by Searle’s method, Specific heat of a liquid using calorimeter, focal length of a concave mirror and a convex lens using u–v method, Speed of sound using resonance column, Verification of Ohm’s law using voltmeter and ammeter, and specific resistance of the material of a wire using meter bridge and post office box.
Kinematics in one and two dimensions (Cartesian coordinates only), projectiles; Uniform circular motion; Relative velocity.
Newton’s laws of motion; Inertial and uniformly accelerated frames of reference; Static and dynamic friction; Kinetic and potential energy; Work and power; Conservation of linear momentum and mechanical energy.
Systems of particles; Centre of mass and its motion; Impulse; Elastic and inelastic collisions.
Law of gravitation; Gravitational potential and field; Acceleration due to gravity; Motion of planets and satellites in circular orbits; Escape velocity.
Rigid body, moment of inertia, parallel and perpendicular axes theorems, moment of inertia of uniform bodies with simple geometrical shapes; Angular momentum; Torque; Conservation of angular momentum; Dynamics of rigid bodies with fixed axis of rotation; Rolling without slipping of rings, cylinders and spheres; Equilibrium of rigid bodies; Collision of point masses with rigid bodies.
Linear and angular simple harmonic motions.
Hooke’s law, Young’s modulus.
Pressure in a fluid; Pascal’s law; Buoyancy; Surface energy and surface tension, capillary rise; Viscosity (Poiseuille’s equation excluded), Stoke’s law; Terminal velocity, Streamline flow, equation of continuity, Bernoulli’s theorem and its applications.
Wave motion (plane waves only), longitudinal and transverse waves, superposition of waves; Progressive and stationary waves; Vibration of strings and air columns; Resonance; Beats; Speed of sound in gases; Doppler effect (in sound).
Thermal expansion of solids, liquids and gases; Calorimetry, latent heat; Heat conduction in one dimension; Elementary concepts of convection and radiation; Newton’s law of cooling; Ideal gas laws; Specific heats (C_{v} and C_{p} for monoatomic and diatomic gases); Isothermal and adiabatic processes, bulk modulus of gases; Equivalence of heat and work; First law of thermodynamics and its applications (only for ideal gases); Blackbody radiation: absorptive and emissive powers; Kirchhoff’s law; Wien’s displacement law, Stefan’s law.
Coulomb’s law; Electric field and potential; Electrical potential energy of a system of point charges and of electrical dipoles in a uniform electrostatic field; Electric field lines; Flux of electric field; Gauss’s law and its application in simple cases, such as, to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell.
Capacitance; Parallel plate capacitor with and without dielectrics; Capacitors in series and parallel; Energy stored in a capacitor.
Electric current; Ohm’s law; Series and parallel arrangements of resistances and cells; Kirchhoff’s laws and simple applications; Heating effect of current.
Biot–Savart’s law and Ampere’s law; Magnetic field near a current-carrying straight wire, along the axis of a circular coil and inside a long straight solenoid; Force on a moving charge and on a current-carrying wire in a uniform magnetic field.
Magnetic moment of a current loop; Effect of a uniform magnetic field on a current loop; Moving coil galvanometer, voltmeter, ammeter and their conversions.
Electromagnetic induction: Faraday’s law, Lenz’s law; Self and mutual inductance; RC, LR and LC circuits with d.c. and a.c. sources.
Rectilinear propagation of light; Reflection and refraction at plane and spherical surfaces; Total internal reflection; Deviation and dispersion of light by a prism; Thin lenses; Combinations of mirrors and thin lenses; Magnification.
Wave nature of light: Huygen’s principle, interference limited to Young’s double-slit experiment.
Atomic nucleus; α, β and γ radiations; Law of radioactive decay; Decay constant; Half-life and mean life; Binding energy and its calculation; Fission and fusion processes; Energy calculation in these processes.
Photoelectric effect; Bohr’s theory of hydrogen-like atoms; Characteristic and continuous X-rays, Moseley’s law; de Broglie wavelength of matter waves.
ARCHITECTURE APTITUDE TEST
Freehand drawing
This would comprise of simple drawing depicting the total object in its right form and proportion, surface texture, relative location and details of its component parts in appropriate scale. Common domestic or day-to-day life usable objects like furniture, equipment, etc., from memory.
Geometrical drawing
Exercises in geometrical drawing containing lines, angles, triangles, quadrilaterals, polygons, circles, etc. Study of plan (top view), elevation (front or side views) of simple solid objects like prisms, cones, cylinders, cubes, splayed surface holders, etc.
Three-dimensional perception
Understanding and appreciation of three-dimensional forms with building elements, colour, volume and orientation. Visualization through structuring objects in memory.
Imagination and aesthetic sensitivity
Composition exercise with given elements. Context mapping. Creativity check through innovative uncommon test with familiar objects. Sense of colour grouping or application.
Architectural awareness
General interest and awareness of famous architectural creations – both national and international, places and personalities (architects, designers, etc.) in the related domain.
JEE Advanced Exam 2018 Question Paper
Year | Paper-1 | Paper-2 |
2007 (JEE Advanced Exam 2018) | 2007p1.pdf | 2007p2.pdf |
2008 (JEE Advanced Exam 2018) | 2008p1.pdf | 2008p2.pdf |
2009 (JEE Advanced Exam 2018) | 2009p1.pdf | 2009p2.pdf |
2010 (JEE Advanced Exam 2018) | 2010p1.pdf | 2010p2.pdf |
2011 (JEE Advanced Exam 2018) | 2011p1.pdf | 2011p2.pdf |
2012 (JEE Advanced Exam 2018) | 2012p1.pdf | 2012p2.pdf |
2013 (JEE Advanced Exam 2018) | 2013p1.pdf | 2013p2.pdf |
2014 (JEE Advanced Exam 2018) | 2014p1.pdf | 2014p2.pdf |
2015 (JEE Advanced Exam 2018) | 2015p1.pdf | 2015p2.pdf |
2016 (JEE Advanced Exam 2018) | 2016p1.pdf | 2016p2.pdf |
Result of JEE Advanced Exam 2018 – June 2018
Types of Seats Reservation of Seats JEE Advanced 2018
Institutes have various types of seats for the candidates based on their (birth) categories, presence or absence of disability and nationality.
Reservation of Seats (JEE Advanced Exam 2018)
Indian nationals belonging to certain categories are admitted under the seats reserved for them in accordance with the rules of the Government of India. The categories and the extent of reservation are as follows:
Other Backward Classes belonging to the Non-Creamy Layer (OBC-NCL)
27% of seats in every course. The backward class should be in the current updated central list of OBCs (http://www.ncbc.nic.in ).
Candidates belonging to the creamy layer of OBC are NOT entitled for reservation. Such candidates are treated as belonging to the general (GEN) i.e., unreserved category, and they will be eligible only for the OPEN seats – the seats for which everyone is eligible .
Scheduled Caste (SC) (JEE Advanced Exam 2018)
15% of seats in every course.
The benefit of reservation will be given only to those castes and tribes that are mentioned in the respective central list of corresponding states published by the Government of India http://socialjustice.nic.in/UserView/index?mid=76750 and http://tribal.nic.in/Content/StatewiseListofScheduledTribesProfiles.aspx.
Scheduled Tribe (ST) (JEE Advanced Exam 2018)
7.5% of seats in every course.
The benefit of reservation will be given only to those castes and tribes that are mentioned in the respective central list of corresponding states published by the Government of India http://socialjustice.nic.in/UserView/index?mid=76750 and http://tribal.nic.in/Content/StatewiseListofScheduledTribesProfiles.aspx .
Persons with Disability (PwD) (JEE Advanced Exam 2018)
3% seats in each of OPEN, OBC-NCL, SC and ST category seats.
Benefit would be given to those who have at least 40% impairment irrespective of the type of disability i.e., locomotor, visual or SEVERE dyslexic.
Leprosy-cured candidates who are otherwise fit to pursue the courses are also included in this sub-category.
De-reservation (JEE Advanced Exam 2018)
Candidates belonging to the OBC-NCL, SC, ST and PwD categories will be declared as qualified on the basis of relaxed criteria. See Rank Lists .
The category of a candidate as entered in the database, which will be made available by the JEE Apex Board [which conducts JEE (Main) 2018 examination], will be final and requests for change of category will NOT be entertained.
Defence Service Candidates (JEE Advanced Exam 2018)
Defence Service (DS) candidates are children of defence / paramilitary personnel killed or permanently disabled in action during war or peacetime operations. Two seats are available for preferential allotment in each Institute for DS candidates. To avail of this preferential allotment, a DS candidate must be in the Common Rank List of JEE (Advanced) 2018 .
DS candidates must be declared this information during JEE (Advanced) 2018 registration.
Foreign Nationals (JEE Advanced Exam 2018)
Candidates who are NOT citizens of India (by birth or naturalized), do not belong to OCI/PIO category, and whose parents are not citizens of India and do not come under OCI/PIO category at the time of registering for JEE (Advanced) 2018 are treated as foreign nationals. Seats allotted to foreign nationals are supernumerary with a cap of 10% of total number of seats in every course. However, the seats allotted to OCI/PIO card holders will be under OPEN category, but not supernumerary.
Foreign nationals are outside the ambit of reservation of seats under the OBC-NCL, SC, ST and PwD categories as specified herein.
Additional Requirements for Certain Courses(JEE Advanced Exam 2018)
Those who opt for Mining Engineering, Mining Machinery Engineering, Integrated M.Sc. program in Geology or Geophysics, or Petroleum Engineering should not have any form of colour blindness. A certificate to this effect from a govt. registered medical practitioner has to be produced at the time of seat acceptance. IITs may constitute a medical board to test the validity of the candidate’s medical condition.
The standards of visual acuity with or without glasses will be adhered to strictly for candidates seeking admission to Mining Engineering as per DGMS Circular 14 of 1972. Persons with one-eyed vision are not permitted to work underground. Candidates with these limitations are not allowed to opt for admission to Mining Engineering and Mining Machinery Engineering.
Gender Restriction For Mining Engineering Profession
Section 46 (1) of the Mines Act, 1952 states that
- No woman shall, notwithstanding anything contained in any other law, be employed
- in any part of a mine which is below ground
- in any mine above ground except between 6:00 and 19:00 hrs.
- However, “female” candidates will be admitted to Mining Engineering or Mining Machinery Engineering related courses at IIT (ISM), Dhanbad, IIT Kharagpur and IIT (BHU).
[pt_view id=”b29232du0k”]